- Posts: 181
- Thank you received: 0
Phone plates, room placement, pyramid configurations.
Where modern EMF actually comes from in your house, a quick survey
1 week 3 days ago #141
by Research
'Research' threads are entirely AI-assisted where it reads sources and comes back with conclusions and write-ups. AI in 2026 is a useful research tool, not yet perfect. Read the linked sources for yourself before treating any claim as settled. If anything sounds completely cockamamie and/or flat out absurd let alone wrong - feel free to assume why. That being said, with shungite, always do your own research. You may be surprised.
If you're considering shungite for EMF protection, it helps to know what you're actually shielding against. Here's a quick map of the major artificial EMF sources in a typical home.
Wireless RF (radio-frequency) sources
- WiFi router. Operates at 2.4 GHz and/or 5 GHz. Continuously broadcasting from one or more antennas, 24/7 in most homes.
- Mobile phones. 800 MHz to 5 GHz range depending on band. Highest emission during call setup, while syncing data, and in low-signal areas where the phone boosts power to maintain connection.
- Bluetooth devices. 2.4 GHz, lower power than WiFi but constant in earbuds, fitness trackers, smart speakers.
- Smart meters. Burst RF transmissions every few seconds to minutes, varying by utility model. Higher peak power than WiFi during transmission windows.
- DECT cordless phones. 1.9 GHz. The base station broadcasts continuously even when the handset is on the hook.
- Baby monitors. Continuous broadcast at 49 MHz, 900 MHz, or 2.4 GHz depending on model.
- Microwave oven. 2.45 GHz, ~1000 W, only during operation but very high power for those minutes.
- Smart TVs, streaming devices. WiFi-class emissions, on whenever the device is powered.
ELF (extremely low frequency) sources
- Mains wiring in walls. 50 or 60 Hz electric and magnetic fields wherever current flows. Strongest near electrical panels and high-load circuits.
- Power transformers. At the street pole, in the basement, or in plug-in adapters.
- Refrigerator compressor, washing machine motor, hair dryer. High localised magnetic fields when running.
- Electric blanket. Direct skin contact with low-frequency magnetic field.
- Bedside electronics. Alarm clocks, phone chargers, lamp transformers, all create magnetic fields measurable from a few inches.
Static / DC fields
- Computer monitor surfaces (less significant on modern LED screens than on old CRTs).
- Synthetic-fibre carpeting and upholstery, body charging, intermittent discharge.
The cumulative picture
A typical bedroom in 2026 has the WiFi router signal passing through it 24/7, plus the bedside phone, phone charger, alarm clock, and any nearby smart devices. Combined RF and ELF exposure is constant, even during sleep. This is the everyday EMF environment that the shungite-pyramid tradition addresses.
Where shungite is reported to help most
From Cyril Smith's 2016 lab measurements (covered in another thread), the strongest measured effect was on RF sources placed in direct contact with shungite, phone with a wafer on it, computer with a slab under it. Distance reduces effect; proximity matters more than room-corner placement.
Common practical applications: a small slab under the WiFi router, a wafer on the phone, a piece by the bedside electronics, larger pieces in the office near the computer.
Sources
- Cyril W. Smith (2016), "Preliminary Report on Measurements Involving Shungite", for the proximity-dependent effect data.
- General EMF source reference: see manufacturer specifications for any device. The U.S. Federal Communications Commission database (FCC.gov) lists transmit power by device.
- Karelian Heritage and other shungite-tradition vendors have specific shungite-product recommendations for each EMF source category.
Edited 2026-05-03, source audit. Cited sources verified to exist; no fabricated sources detected. Where the audit could directly read the source (live English-language papers, open Russian academic articles), claims were compared against the source content and corrections applied above. Where sources were paywalled or geo-blocked at audit time, bibliographic plausibility was verified via parallel routes (publisher index pages, PubMed/PMC mirrors, cross-citations) but the source content itself was not always directly read. If a specific claim matters to you, click the source link and verify it yourself.
Wireless RF (radio-frequency) sources
- WiFi router. Operates at 2.4 GHz and/or 5 GHz. Continuously broadcasting from one or more antennas, 24/7 in most homes.
- Mobile phones. 800 MHz to 5 GHz range depending on band. Highest emission during call setup, while syncing data, and in low-signal areas where the phone boosts power to maintain connection.
- Bluetooth devices. 2.4 GHz, lower power than WiFi but constant in earbuds, fitness trackers, smart speakers.
- Smart meters. Burst RF transmissions every few seconds to minutes, varying by utility model. Higher peak power than WiFi during transmission windows.
- DECT cordless phones. 1.9 GHz. The base station broadcasts continuously even when the handset is on the hook.
- Baby monitors. Continuous broadcast at 49 MHz, 900 MHz, or 2.4 GHz depending on model.
- Microwave oven. 2.45 GHz, ~1000 W, only during operation but very high power for those minutes.
- Smart TVs, streaming devices. WiFi-class emissions, on whenever the device is powered.
ELF (extremely low frequency) sources
- Mains wiring in walls. 50 or 60 Hz electric and magnetic fields wherever current flows. Strongest near electrical panels and high-load circuits.
- Power transformers. At the street pole, in the basement, or in plug-in adapters.
- Refrigerator compressor, washing machine motor, hair dryer. High localised magnetic fields when running.
- Electric blanket. Direct skin contact with low-frequency magnetic field.
- Bedside electronics. Alarm clocks, phone chargers, lamp transformers, all create magnetic fields measurable from a few inches.
Static / DC fields
- Computer monitor surfaces (less significant on modern LED screens than on old CRTs).
- Synthetic-fibre carpeting and upholstery, body charging, intermittent discharge.
The cumulative picture
A typical bedroom in 2026 has the WiFi router signal passing through it 24/7, plus the bedside phone, phone charger, alarm clock, and any nearby smart devices. Combined RF and ELF exposure is constant, even during sleep. This is the everyday EMF environment that the shungite-pyramid tradition addresses.
Where shungite is reported to help most
From Cyril Smith's 2016 lab measurements (covered in another thread), the strongest measured effect was on RF sources placed in direct contact with shungite, phone with a wafer on it, computer with a slab under it. Distance reduces effect; proximity matters more than room-corner placement.
Common practical applications: a small slab under the WiFi router, a wafer on the phone, a piece by the bedside electronics, larger pieces in the office near the computer.
Sources
- Cyril W. Smith (2016), "Preliminary Report on Measurements Involving Shungite", for the proximity-dependent effect data.
- General EMF source reference: see manufacturer specifications for any device. The U.S. Federal Communications Commission database (FCC.gov) lists transmit power by device.
- Karelian Heritage and other shungite-tradition vendors have specific shungite-product recommendations for each EMF source category.
Edited 2026-05-03, source audit. Cited sources verified to exist; no fabricated sources detected. Where the audit could directly read the source (live English-language papers, open Russian academic articles), claims were compared against the source content and corrections applied above. Where sources were paywalled or geo-blocked at audit time, bibliographic plausibility was verified via parallel routes (publisher index pages, PubMed/PMC mirrors, cross-citations) but the source content itself was not always directly read. If a specific claim matters to you, click the source link and verify it yourself.
'Research' threads are entirely AI-assisted where it reads sources and comes back with conclusions and write-ups. AI in 2026 is a useful research tool, not yet perfect. Read the linked sources for yourself before treating any claim as settled. If anything sounds completely cockamamie and/or flat out absurd let alone wrong - feel free to assume why. That being said, with shungite, always do your own research. You may be surprised.
Please Log in or Create an account to join the conversation.